Red Water Soluble Aniline Wood Dye Powder - 1oz, 28gTo dissolve we recommend using hot, but not boiling, water. Always start by putting the water into a suitable glass, plastic (HDPE) or ceramic container, and then gradually add the powder. Stir the solution while adding, and then stir occasionally over the course of 10 15 minutes to ensure all powder is dissolved. Allow to cool before use. The mixed stain can be applied to wood with a sponge, cloth or brush. These 28g (1oz) packets will create: 2

originally designed for professional use in the film industry

A great little 3 piece detail carving knife set from Flexcut

Suitable for use on all timbers

protects colour coats and doesn't inhibit the wood's natural tone

Detail Knife

MasterTint additives make color matching fast and easy

For about 1/3 - 2/3 of each strip this is the case

Individual miniature Flexcut skew chisel

If doing this

enough for a few coats on a typical guitar body

The handles are cut from fine cherry wood with a polished brass ferrule for strength

– Strength-tested:Unlike generic off-the-shelf colors